English 
简体中文 
Español 
Deutsch 
Français 
Bahasa Indonesia 
Malaysia 
Português 
Русский язык 
بالعربية 
Kiswahili 
বাংলা 
Epoxy Floor Middle CoatIing
Application
Suitable for intermediate leveling and reinforcement layers in epoxy flooring systems for factories, warehouses, logistics centers, underground parking garages, machine workshops, electronics plants, food processing facilities, pharmaceutical workshops, automotive service centers, and commercial buildings. Recommended where improved flatness, higher load-bearing capacity, and increased system thickness are required.
Product Features
- Formulated with premium epoxy resin and curing agents for excellent intercoat adhesion.
- Excellent filling performance to repair pores, pinholes, and minor surface defects while improving floor flatness.
- Can be mixed with quartz sand or quartz powder to form a high-strength mortar layer.
- Provides outstanding compressive strength, abrasion resistance, and impact resistance for industrial flooring systems.
- Low shrinkage after curing with excellent dimensional stability.
- Compatible with epoxy primers and topcoats to improve the durability of the complete flooring system.
- Easy to apply and level, suitable for various epoxy flooring applications.
Standards
| Item | Specification |
|---|---|
| Product | Epoxy Floor Intermediate Coat |
| Type | Two-component Epoxy Intermediate Coating |
| Standard | Enterprise Standard (Q/GDHY)* |
| Composition | Epoxy Resin, Hardener, Fillers & Additives |
| Application | Trowel / Scraper |
| Matching System | Epoxy Primer + Intermediate Coat + Topcoat |
Construction Procedure
- Inspect the cured primer layer and ensure the substrate is dry and clean.
- Mix Part A and Part B thoroughly, then add quartz sand or quartz powder if required.
- Apply evenly with a trowel or scraper to fill pores and level the surface.
- Sand after curing and repair any remaining imperfections.
- Remove all sanding dust before topcoat application.
- Apply epoxy topcoat or self-leveling finish after complete curing.
Technical Specifications
| Item | Specification |
|---|---|
| Type | Two-component |
| Appearance | Colored Viscous Liquid |
| Mixing Ratio | A:B (According to Product Label) |
| Coverage | 0.30–1.20 kg/m² |
| Surface Dry | ≤6 Hours |
| Hard Dry | ≤24 Hours |
| Full Cure | 7 Days |
| Application Temperature | 5℃–35℃ |
| Package | 20kg/Set, 30kg/Set (Customizable) |
| Color | Grey (Customizable) |
Transportation & Storage
During transportation, protect the product from direct sunlight, rain, heavy impact, and compression. Store in unopened containers in a cool, dry, and well-ventilated area at 5℃–35℃, away from heat and ignition sources. Shelf life is 12 months under proper storage conditions.
